Air extract units TCF CVM

Air extract units from 300 to 4.500 m3/h. Aluminium frame and 25mm panels.

The CVM series of air extractors is the result of careful design. The extractors have been manufactured to make them versatile and suitable for all applications where forced ventilation is required. Cubic shape enables panel position and unit orientation to be easily modified. This also enables onsite modifications. There are six different sizes available with flow rates ranging from 300 to 4500 m3/h and for static heads up to 250 Pa. Careful attention has been given to noise and vibration levels.

Design features

Twin extraction electric ventilators.

230 V single-phase three speed electric motors with permanently enabled condenser.

Aluminium section frame.

Twin 25 mm sheet metal panelling. The internal layer is galvanised and the outer layer plasticized and galvanised. There is a layer of heat injected closed cell expansion polyurethane between the two metal layers.

Flange for channel connection.

Removable inspection cover for easy maintenance.

Protective mesh in accordance with current safety standards.


Available set-ups

Outdoor version


Accessories

  • Switch for three-speed functioning plus stop

  • Brackets for ceiling mounting

  • Expulsion outlet casing

  • Suction shutter

  • Suction grill

Catalogues
Catalogue CVM ENG
English
CVM_catalogue_2013_ENG.pdf
683 KB
Catalogue CVM FRA
French
CVM_catalogue_2013_FRA.pdf
690 KB
Manuals
Operation and maintenance manual CV CVM CVMI EV ENG
English
CV_CVM_CVMI_EV_Manual_ENG.pdf
429 KB